732 356 4438
Advanced Process TechnologyAdvanced Process Technology
  • HOME
  • ABOUT
    • Our History
  • CHOOSE A PROCESS
    • Open Casting
    • Closed-Mold Injection
    • Vacuum Casting
    • (RTM) Resin Transfer Molding
    • (VARTM) Vacuum-Assisted Resin Transfer Molding
    • RTM/VARTM Combo
    • Filament Winding – Resin Bath Filling
  • PRODUCTS
    • SRD Series
    • SRD i Series
    • ECS-Series
    • Flying Wedge
    • Tanks
    • Quick Ship Tanks
  • SUPPORT
  • CONTACT

Vacuum Casting

The vacuum casting process draws vacuum on the mold before the air-free metered and mixed material is dispensed into the mold. The resin materials are vacuum degassed in the vacuum casting machine’s supply  tanks. The air-free mixed material is dispensed into equally air-free, open or closed molds from the top or the bottom, while the mold is maintained under constant vacuum.

Products Manufactured - with this application:
Reactive Thermoset Resins Processed - (Epoxies, Polyurethanes, Polyesters, Vinyl Esters, Silicones and Polyimids):
Industries Using These Resin Dispensing Machine Processes:
Each of these APT Dispensing Systems optionally include:
Products Manufactured - with this application:
  • High-Voltage Ignition Coils
  • Magnetic Resonance Imaging (MRI) Coils
  • Current Transformers
  • Voltage Transformers
Reactive Thermoset Resins Processed - (Epoxies, Polyurethanes, Polyesters, Vinyl Esters, Silicones and Polyimids):
  • Abrasive-Filled and Unfilled, Reactive Thermoset Resins
  • With or without aluminum oxide, silica sand or glass powder fillers.
  • With or without solid or hollow microspheres.
  • 2 to 8 – Metered Components
  • Heated or Room-Temperature Formulations
Industries Using These Resin Dispensing Machine Processes:
  • Wind Energy
  • Electrical
  • Electric Power Transmission
  • Medical
  • Oil Drilling
Each of these APT Dispensing Systems optionally include:
  • Manual or Continuous-Flow Vacuum Chambers
  • Programmed PLC or PC-Controllers with Touchscreen Interface
  • Digital User-Presets for Ratio, Shot-Size, Output-Rate, Temperatures, Vacuum Levels and Mixer Speed.
  • Batch Material Preparation Tanks – apply heat, agitation and vacuum to the materials in batches
  • or Continuous Thin Film Degassers – heat, agitate and degas materials on-the-fly.
  • Vacuum Control System – for precise vacuum level control in the degassing tanks and in the vacuum chamber.
  • Rotary Gear Metering Pumps or Piston Metering Pumps
  • Digital, Servomotor Drives for the Metering Pumps or Wedge-Driven Piston Metering Pumps
  • Mass Flowmeters or Mechanical Flow Meters
  • Static or Dynamic Mixers
  • Purge Systems
  • Data Logger
  • Vacuum Pumps
  • Open Casting
  • Closed-Mold Injection
  • Vacuum Casting
  • (RTM) Resin Transfer Molding
  • (VARTM) Vacuum-Assisted Resin Transfer Molding
  • Filament Winding – Resin Bath Filling

Learn how any of these systems can work for your vacuum casting application.

SRD SOLUTION
SRD I SOLUTION
ECS SOLUTION
FLYING WEDGE SOLUTION

AVAILABLE CUSTOMER SERVICE

We are committed to responsive after-sale service and technical support.

After delivery, we check the installation.

Assist with running your SRD, ECS or HT-Series system with your material.

Your designated machine-operators can be trained.

SITEMAP

  • HOME
  • CHOOSE YOUR RESIN PROCESS
  • PRODUCTS
  • SUPPORT
  • CONTACT

Contact Us

732.356.4438

732.356.4005

200 Egel Avenue
Middlesex, New Jersey 08846
© 2015 All rights reserved.