732 356 4438
Advanced Process TechnologyAdvanced Process Technology
  • HOME
  • ABOUT
    • Our History
  • CHOOSE A PROCESS
    • Open Casting
    • Closed-Mold Injection
    • Vacuum Casting
    • (RTM) Resin Transfer Molding
    • (VARTM) Vacuum-Assisted Resin Transfer Molding
    • RTM/VARTM Combo
    • Filament Winding – Resin Bath Filling
  • PRODUCTS
    • SRD Series
    • SRD i Series
    • ECS-Series
    • Flying Wedge
    • Tanks
    • Quick Ship Tanks
  • SUPPORT
  • CONTACT

Filament Winding Bath Fills

Wet resin filament winding is an automatic fiber winding process that runs composite fibers down into and up out of a resin bath. The fibers are drawn through the bath and the resin-impregnated fibers are then wound on a mandrel. Cylindrical, conical and spherical composite products are produced with this process. APT’s meter-mix dispense systems provide continuous, on-ratio, air-free, metered and mixed resin to the filament winding bath. Options include a liquid level sensor on the bath and various data acquisition packages.

Products Manufactured - with this application:
Reactive Thermoset Resins Processed - (Epoxies, Polyurethanes, Polyesters, Vinyl Esters, Silicones and Polyimids):
Industries Using These Resin Dispensing Machine Processes:
Each of these APT Dispensing Systems optionally include:
Products Manufactured - with this application:
  • Solid Rocket Motor Cases
  • Helicopter Tie Bars
  • MRI Magnetic Coil Cases
  • Missile Launching Tubes
  • Pressure Cylinders
  • Bicycle Frames
  • Driveshafts
  • Composite Wound Tubes
Reactive Thermoset Resins Processed - (Epoxies, Polyurethanes, Polyesters, Vinyl Esters, Silicones and Polyimids):
  • Unfilled, Reactive Thermoset Resins
  • Heated or Room-Temperature
  • 2 to 8 – Metered Components
Industries Using These Resin Dispensing Machine Processes:
  • Aerospace
  • Medical
  • Industrial
  • Recreational
  • Automotive
  • Wind Energy
Each of these APT Dispensing Systems optionally include:
  • Programmed PLC or PC-Controllers with Touchscreen Interface
  • Digital User-Presets for Ratio, Shot-Size, Output-Rate, Temperatures, Vacuum Levels and Mixer Speed.
  • Batch Material Preparation Tanks – apply heat, agitation and vacuum to the materials in batches
  • or Continuous Thin Film Degassers – heat, agitate and degas materials on-the-fly.
  • Rotary Gear Metering Pumps or Piston Metering Pumps
  • Digital, Servomotor Drives for the Metering Pumps or Wedge-Driven Piston Metering Pumps
  • Mass Flowmeters or Mechanical Flow Meters
  • Static or Dynamic Mixers
  • Liquid Level Sensor on the Resin Bath
  • Purge Systems
  • Data Logger
  • Vacuum Pumps
  • Open Casting
  • Closed-Mold Injection
  • Vacuum Casting
  • (RTM) Resin Transfer Molding
  • (VARTM) Vacuum-Assisted Resin Transfer Molding
  • Filament Winding – Resin Bath Filling

Learn how any of these systems can work for your filament winding bath fills application.

SRD SOLUTION
SRD I SOLUTION
ECS SOLUTION
FLYING WEDGE SOLUTION

AVAILABLE CUSTOMER SERVICE

We are committed to responsive after-sale service and technical support.

After delivery, we check the installation.

Assist with running your SRD, ECS or HT-Series system with your material.

Your designated machine-operators can be trained.

SITEMAP

  • HOME
  • CHOOSE YOUR RESIN PROCESS
  • PRODUCTS
  • SUPPORT
  • CONTACT

Contact Us

732.356.4438

732.356.4005

200 Egel Avenue
Middlesex, New Jersey 08846
© 2015 All rights reserved.