| Automatic
Metering, Mixing and Dispensing Systems: |
|
SRD-Series
Servomotor-Driven (Gear Pump) Systems
Continuous Gear Pump Metering, Mixing and Dispensing Systems with independent,
servomotor-driven rotary gear pumps, optional
continuous recirculation and
mass flowmeters. Typically includes
all-digital central touchscreen control of ratio, shot-size,
output-rate, material process temperatures and vacuum levels. |
Process
unfilled, mild-abrasive filled and microballoon-filled cast urethane elastomers, epoxies and vinyl esters.
Please specify type
of fillers to be processed. |
CDM-Series
Direct Common Drive (Gear Pump) Systems
Continuous Gear Pump Metering,
Mixing and Dispensing Systems with two rotary pumps
driven by a common DC-motor drive. |
Process
unfilled cast urethane elastomers, epoxies and vinyl esters |
ECS-Series
Servomotor-Driven (Piston Pump) Systems
Servo-driven Piston Pump Metering, Mixing and Dispensing
Systems with independent,
servomotor-driven piston pumps, optional
continuous recirculation and
mass flowmeters. Typically includes
all-digital central touchscreen control of ratio, shot-size,
output-rate, material process temperatures and vacuum levels. |
Process
abrasive-filled and unfilled epoxies, polyesters, vinyl esters and cast urethane
elastomers.
Please specify type of fillers to be processed. |
Flying Wedge®
HT-Series (Piston Pump) Systems
Positive Displacement Piston Pump Shot Machines with an
adjustable-ratio, mechanical wedge drive.
Depending on system configuration, includes digital touchscreen control
of shot-size, output-rate, material temperatures and vacuum levels.
|
Process
abrasive-filled and unfilled epoxies, polyesters, vinyl esters and cast urethane
elastomers.
Please specify type of fillers to be
processed. |
RTM
(Resin Transfer Molding) and VARTM (Vacuum-
Assisted RTM) Injection and Infusion Systems -
these composite applications are handled with our
SRD, ECS and HT-Series Metering, Mixing and Dispensing Systems -- also, for composite parts
production at high or low mixed material output pressure,
with and/or without vacuum assist on your molds. |
Process
unfilled epoxies and polyesters; minimize air-bubble and void content in
composite parts and composite part preforms. |
| Vacuum
Casting Systems -
for air-bubble-free, high-voltage potting and encapsulating of electrical and electronic components.
Air-free metered and mixed epoxies from our ECS, HT or SRD-Series System
are dispensed into your electrical assemblies inside manual or fully
automatic (continuous conveyor) vacuum chambers. |
Deliver air-free epoxy
into your critical air-free electrical or electronic assemblies at 0.1
to 2-mmHg vacuum, depending on the application. |
| |
|
| Accessory Equipment: |
|
|
Programmable PLCs and IBM PC
Touchscreens For central digital control
of ratio, shot-size, output-rate, material process temperatures, vacuum
levels, pressure inside the mold, liquid levels and other critical
process variables. |
|
|
Batch Process Tanks (Standard)
0.5, 2,
5, 10, 15, 30, 60, 75, 100 and 250-Gallon to heat, agitate and vacuum-degas
resin in batches. |
|
Continuous Thin-Film Deaerators (Slinger-type)
for heating, agitating,
degassing and feeding air-free resins
on-the-fly to metering and mixing
machines or your downstream process. |
|
Vacuum Chambers (Standard and Custom)
for low and high-voltage coil
potting/encapsulating as well as
vacuum-assisted composite applications. |
|
|
Quick-Change Color Metering Systems
Automatically meter one or more colors separately and on-ratio with
separate color metering pumps. Keeps colors out of the batch tanks
for fast color switching. |
|
Quik-Melt® MOCA Melters for
pelletized MOCA and other
hot-melts
Powder-Melting Devices for fast, on-demand curative
melting.
Vacuum Transfer Systems
for
transferring solid pelletized curatives
into the curative melter. |
|
Heateroll® Drum Melters for
preheating and rolling 55-gallon drums of resin.
Melts drums four to six times faster than conventional walk-in ovens.
|
|
| |
|
Other Products:
Click Here for Photos and Descriptions |
|
